The following is a list of error codes returned by Audio Xtra. It is important to notice that negative error codes are not Audio Xtra errors, but Director standard error codes.
0 |
No error |
-8219 |
Unable to get file path. File not found. |
-8220 |
Invalid file operators |
-8221 |
File not found |
-8222 |
File positioning problem |
-8223 |
Disk is full |
-8224 |
File permission. Device in use. |
-8225 |
Out of file handles. Current record settings may not be supported by the installed audio driver.
|
-8226 |
Misc. file error |
-8227 |
File already exists |
-8228 |
Lost network connection |
-8229 |
File is not open |
-8230 |
Chunk not found |
-8231 |
Invalid swap record |
-8232 |
At end of file |
-8233 |
Bad chunk size |
-8234 |
Drive not found |
-8235 |
File path is too long |
-8236 |
Invalid directory |
-8700 |
Out of memory |
-8701 |
Bad sound name |
-8702 |
Bad data type |
-8703 |
Misc. sound error |
-8704 |
Bad sound type |
-8705 |
Invalid member type |
-8706 |
Bad info type |
-8707 |
Duplicate sound name |
-8708 |
MIX services unavailable |
-8709 |
Cannot read this file format |
-8710 |
File format not supported |
-8711 |
Cannot set this |
-8712 |
No platform support |
-8713 |
No Shockwave permission |
-8714 |
Bad number of arguments |
-8715 |
Value out of range |
-8716 |
Too much hard drive space |
-8717 |
Cannot show Shockwave permissions |
-8718 |
This feature is not supported in Shockwave |
-8719 |
No private directory has been specified |
-8720 |
Invalid file path (contains path delimiters) |
-8721 |
Device not found |
-8724 |
unable to open mixer |
-8725 |
Unable to get mixer information |
-8726 |
No wave input devices |
-8727 |
Cannot control volume for this device |
-8728 |
Cannot control meter level for this device |
-8729 |
Misc. mixer error |
-8730 |
This is a mono device (used when trying to set/get the right volume) |
-8731 |
Mixer is unable to select a device |
-8800 |
Sound recorder closed |
-8801 |
Sound recording device in use |
-8802 |
Sound recorder busy |
-8803 |
Invalid sample rate |
-8804 |
Invalid sample depth |
-8805 |
Invalid compression type |
-8806 |
Input source string not found |
-8807 |
Input source type not found |
-8808 |
Sound hardware error |
-8809 |
No sound is recording |
-8810 |
Zero length sound recording |
-8811 |
Invalid file format |
-8812 |
Recorder already opened |
-8813 |
Zero-length recording buffer |
-8814 |
No sound input device available for recording. Verify that the sound card is functioning and its driver is installed. |
-8815 |
Invalid number of channels. |
-8816 |
Invalid sound format settings. |
-8817 |
RAM buffer exceeded. |
-8818 |
Recording is not paused (tried to call resume) |
-8819 |
Recording is already paused (tried to call pause) |
-8820 |
RAM recording buffer is full |
-8821 |
Invalid file extension for platform |
-8900 |
Sound already playing |
-8901 |
Sound not playing |
-8902 |
No sounds in list |
-8903 |
Zero length sound |
-8904 |
No free sound channels |
-8905 |
Bad sound format data |
-8906 |
Can not delete: sound is busy |
-8950 |
Width out of range (min = 4, max = 3096) |
-8951 |
Height out of range (min = 4, max = 255) |
-8952 |
Sound length is zero |
-8953 |
Sample frames are zero |
-8954 |
Channel is out of range (must be at least 1, max is # of channels in the sound) |
-8955 |
Plot buffer size is zero |
-8956 |
Plot buffer size not correctly divisible |
-8957 |
Plot buffer size too small |
-8958 |
Plot resolution is not one of the valid symbols (#low,#medium,#high,#maximum) |
-8959 |
Resolution too high for the width specified
Will happen, if, for example, you try to plot a 100 ms sound over a width of 3000 pixels -- not enough sound data for this. Try #maximum if you get this or else decrease the width of the bitmap |
-9000 to -9404
-9406 on |
Internal Audio Xtra error code. Should never be returned. Contact support with the name of the function that produced the error. |